Akterm Crystal

Possible Uses:

Transparent, vapor-permeable protective coating for facades, covering stone and wood. Contains acrylic, polyethylene wax and special polymers that repel water and dirt with a finish layer. Designed to protect against moisture and wind, wherever you want to use the look and color. It has a matte gloss after application.

WATER BASED PRODUCT

Waterproofing and wind protection:

• bricks
• concrete
• natural stones
• ceramics
• tiles
• wooden surface
• metal

Material consumption:

The flow rate of AKTERM Crystal is 1 liter per 1 m² of the surface with the layer thickness of 1 mm.
The color of the coating once it is dry is transparent.

How to Use:

Application temperature: + 5 ℃ - + 45 ℃
Application method: brush, roller, spray
The product looks like a homogeneous liquid mass, contains special strong polymers. It helps to avoid rot, cracking, mold on the surface. The waterproofing coating is applied with a brush, roller or spray, it can be used inside and outside. It is used in 2 approaches, the approximate consumption for each is 1 kg / m2 with a continuous layer thickness of 1 mm. Full drying takes about 5 hours. The product is packed in containers with a capacity of 5, 10, 20 liters.

After application, the coating will retain its natural color and fresh appearance for a long time. Repeated conservation work will be needed only after a few years, and removing the old coating is not necessary.